[TYPO3-dam] Localize DAM Category
georg kuehnberger
georg at georg.org
Tue Jul 15 19:34:08 CEST 2008
Erik,
Being you, here it what I would do:
(this rhymes so it has to be good ;-)
Option-1: Setup a local TYPO3-copy and test the upgrade to the most
recent DAM Version;
Option-2: Upgrade TYPO3-core, which you will have to do anyway, sooner
or later;
regards georg
Erik Frister wrote:
> Thanks for the link. The thing is that the Typo3 installation I have
> (4.0.9) is lower than the one required (4.1.0). Could that be the cause
> of the problems I encounter? I have no immediate influence on the
> version in use so I rather find a solution to this without touching the
> Backend. Do you know if I can ignore the version requirement?
>
> georg kuehnberger schrieb:
>> Erik,
>>
>> The screens were made with the lastest Snapshot-Version from
>> http://wiki.typo3.org/index.php/Dam#Install_the_latest_nightly_snapshot_version
>>
>> I'd recommend to upgrade (after backup of the old ones);
>>
>> regards georg
>>
>>
>> Erik Frister wrote:
>>> Ok I thought this was solved but apparently it isn't. I did
>>> EVERYTHING you said, but if you take a look at your last screenshot,
>>> I even have the [Localization] Column for Media, but unlike in your
>>> 10. Step I have no (!!!) Localization column for Media Category.
>>> Althought I see it for Media I do NOT see it for categories. Using
>>> DAM 1.0.13 which I figure is the latest version. How can this be? I
>>> was so confused to see the localization on Media but NOT on the
>>> categories...
>>>
>>> georg kuehnberger schrieb:
>>>> Erik,
>>>> You might wanna check out the following screenshots I just made for
>>>> you: (Testing a nice FF plugin named FireShot ;-)
>>>>
>>>> - Create sys_language
>>>> http://uploads.screenshot-program.com/my.php?image=upl1551885114.jpg
>>>>
>>>> - Create page language overlay
>>>> http://uploads.screenshot-program.com/my.php?image=upl3575485151.png
>>>>
>>>> - Resulting Localization Options
>>>> http://uploads.screenshot-program.com/my.php?image=upl2912212787.jpg
>>>>
>>>> hth georg
>>>>
>>>>
>>>> Erik Frister wrote:
>>>>> Thanks.
>>>>> I did that. But again after I successfully created the page
>>>>> language, I can only localize the assets but NOT the categories. I
>>>>> have the 'localization view' enabled. But there are no flags
>>>>> visible next to my Media Categories, nor can I localize when I
>>>>> 'edit' the categories...am I missing something?
>>>>>
>>>>> Dr. Ronald P. Steiner schrieb:
>>>>>> Hi Erik,
>>>>>>
>>>>>> Just create go to Web -> List and "create a new record". Choose
>>>>>> "Alternative Page Language". The title does not matter, but choose
>>>>>> the language as needed.
>>>>>> Now you can create an Translation to each record in Media -> List
>>>>>>
>>>>>> hope that helps
>>>>>>
>>>>>> Ron
>>>>>>
>>>>>> Erik Frister schrieb:
>>>>>>> Hey guys,
>>>>>>>
>>>>>>> how can I localize the dam categories I create? In the
>>>>>>> localization view on web > list there is no "localize to" option
>>>>>>> for the Media > Categories.
>>>>>>>
>>>>>>> I have googled it, searched my Typo3 books and looked for it in
>>>>>>> the DAM documentation, but there is just no finding help so far.
>>>>>>> Any hints would be greatly appreaciated.
>>>>>>>
>>>>>>> Greetings,
>>>>>>>
>>>>>>> Erik
More information about the TYPO3-project-dam
mailing list