[TYPO3-UG Italy] Allineare le tabelle nell'RTE
Federico Bernardin
typo3list at bernardin.it
Fri Dec 30 15:01:07 CET 2011
Ciao, dimenticavo,
prova a mettere questo nel typoscript template:
lib.parseFunc_RTE.externalBlocks.table.stdWrap.HTMLparser.tags.table.fixAttrib>
Ciao
federico
Il giorno 30/dic/2011, alle ore 14:43, Elena Bartolotti ha scritto:
> Grazie mille Federico!
> Per provare ho fatto un brutale copia/incolla del tuo codice e non mi funziona.
> Ho poi provato a selezionarmi solo ciò che mi serve, ovvero
>
> RTE.default {
> contentCSS = fileadmin/template/css/rte.css
> classesTable = table_left, table_center
> proc.overruleMode = ts_css
> }
>
> ## Use same RTE processing rules in FE
> RTE.default.FE.proc < RTE.default.proc
>
> ## RTE processing rules for bodytext column of tt_content table
> ## Erase settings from other extensions
> RTE.config.tt_content.bodytext >
>
> ## Make sure we use ts_css transformation
> RTE.config.tt_content.bodytext.proc.overruleMode = ts_css
> RTE.config.tt_content.bodytext.types.text.proc.overruleMode = ts_css
> RTE.config.tt_content.bodytext.types.textpic.proc.overruleMode = ts_css
>
> In questo modo mi mette le classi selezionabili nel dropbox della tabella nell'rte, ma poi non mi lascia il parametro class vuoto nel tag table, così <table class="">
> Che mi sono persa per strada?
>
>
> Il 30/12/2011 11:33, Federico Bernardin ha scritto:
>> Ciao Elena ti allego un esempio di TSConfig che uso normalmente:
>>
>>
>> #-----------------------------------
>> # RTE Configuration
>> #-----------------------------------
>>
>> RTE.default {
>>
>> ## Custom client CSS for same behavoir in BE and FE
>> contentCSS = fileadmin/templates/media/css/rte.css
>> classesTable = borderBlue,borderBlack,transparent
>> hideTableOperationsInToolbar = 1
>> buttons.toggleborders.keepInToolbar = 1
>> hideButtons =
>> FE.hideButtons =
>> showButtons (
>> blockstylelabel, blockstyle, textstylelabel, textstyle, fontstyle, fontsize, formatblock, bold, italic, underline, strikethrough, subscript, superscript, lefttoright, righttoleft, left, center, right, justifyfull, orderedlist, unorderedlist, outdent, indent, textcolor, bgcolor, textindicator, emoticon, insertcharacter, line, link, image, table, user, acronym, findreplace, spellcheck, chMode, inserttag, removeformat, copy, cut, paste, undo, redo, showhelp, about, toggleborders, tableproperties, rowproperties, rowinsertabove, rowinsertunder, rowdelete, rowsplit, columninsertbefore, columninsertafter, columndelete, columnsplit, cellproperties, cellinsertbefore, cellinsertafter, celldelete, cellsplit, cellmerge
>> )
>>
>> proc {
>> ## CSS Styled Content is used.
>> overruleMode = ts_css
>>
>> ## Do not convert br to p
>> dontConvBRtoParagraph = 1
>>
>> ## Remap div to p
>> remapParagraphTag = p
>>
>> ## Tag which are allowed outside the p and div
>> allowTagsOutside = hr, address
>>
>> ## TAGS ALLOWED
>> ## Added to the default internal list: b,i,u,a,img,br,div,center,pre,font,hr,sub,sup,p,strong,em,li,ul,ol,blockquote,strike,span
>> ## But, for the sake of clarity, we use a complete list in alphabetic order.
>> ## center, font, strike, sdfield and u will be removed on entry (see below).
>> ## b and i will be remapped on exit (see below).
>> ## Note that the link accessibility feature of htmlArea RTE does insert img tags.
>> allowTags (
>> a, abbr, acronym, address, blockquote, b, br, caption, cite, code, div, em,
>> h1, h2, h3, h4, h5, h6, hr, i, img, li, link, ol, p, pre, q, sdfield,
>> span, strong, sub, sup, table, tbody, td, th, tr, tt, ul
>> )
>>
>> ## TAGS DENIED
>> ## Make sure we can set rules on any tag listed in allowTags.
>> denyTags>
>>
>> ## ALLOWED P& DIV ATTRIBUTES
>> ## Attributes class and align are always preserved
>> ## Align attribute will be unset on entry (see below)
>> ## This is a list of additional attributes to keep
>> keepPDIVattribs = xml:lang
>>
>> ## CONTENT TO DATABASE
>> entryHTMLparser_db = 1
>> entryHTMLparser_db {
>> ## TAGS ALLOWED
>> ## Always use the same list of allowed tags.
>> allowTags< RTE.default.proc.allowTags
>>
>> ## TAGS DENIED
>> ## Make sure we can set rules on any tag listed in allowTags.
>> denyTags>
>>
>> ## AVOID CONTENT BEING HSC'ed TWICE
>> htmlSpecialChars = 0
>>
>> tags {
>> ## REMOVE IMG TAGS
>> # img.allowedAttribs = 0
>> # img.rmTagIfNoAttrib = 1
>>
>> ## REMOVE SPAN TAGS
>> #span.allowedAttribs = 1
>> #span.rmTagIfNoAttrib = 1
>>
>> ## CLEAN ATTRIBUTES ON THE FOLLOWING TAGS
>> ## Span fixAttrib unnessesary since not allowed.
>> #span.fixAttrib.style.unset = 1
>> p.fixAttrib.align.unset = 1
>> div.fixAttrib.align.unset = 1
>> hr.allowedAttribs = class
>> b.allowedAttribs = xml:lang
>> blockquote.allowedAttribs = xml:lang
>> cite.allowedAttribs = xml:lang
>> em.allowedAttribs = xml:lang
>> i.allowedAttribs = xml:lang
>> q.allowedAttribs = xml:lang
>> strong.allowedAttribs = xml:lang
>> sub.allowedAttribs = xml:lang
>> sup.allowedAttribs = xml:lang
>> tt.allowedAttribs = xml:lang
>> }
>>
>> ## REMOVE OPEN OFFICE META DATA TAGS AND DEPRECATED HTML TAGS
>> ## We use this rule instead of the denyTags rule so that we can
>> ## protect custom tags without protecting these unwanted tags.
>> removeTags = center, font, o:p, sdfield, strike, u
>>
>> ## PROTECT CUSTOM TAGS
>> keepNonMatchedTags = protect
>> }
>>
>> HTMLparser_db {
>> ## STRIP ALL ATTRIBUTES FROM THESE TAGS
>> ## If this list of tags is not set, it will default to: b,i,u,br,center,hr,sub,sup,strong,em,li,ul,ol,blockquote,strike.
>> ## However, we want to keep xml:lang attribute on most tags and tags from the default list where cleaned on entry.
>> noAttrib = br
>>
>> ## XHTML COMPLIANCE
>> ## Note that applying xhtml_cleaning on exit would break non-standard attributes of typolink tags
>> xhtml_cleaning = 1
>> }
>>
>> exitHTMLparser_db = 1
>> exitHTMLparser_db {
>> ## REMAP B AND I TAGS
>> ## b and i tags are used by Mozilla/Firefox in editing mode.
>> ## This must be done on exit because the default HTMLparser_db parsing executes the reverse mapping.
>> tags.b.remap = strong
>> tags.i.remap = em
>>
>> ## KEEP ALL TAGS
>> ## Unwanted tags were removed on entry.
>> ## Without this rule, the parser will remove all tags! Presumably, this rule will be more efficient than repeating the allowTags rule
>> keepNonMatchedTags = 1
>>
>> ## AVOID CONTENT BEING HSC'ed TWICE
>> htmlSpecialChars = 0
>> }
>> }
>> }
>>
>> ## Use same RTE processing rules in FE
>> RTE.default.FE.proc< RTE.default.proc
>>
>> ## RTE processing rules for bodytext column of tt_content table
>> ## Erase settings from other extensions
>> RTE.config.tt_content.bodytext>
>>
>> ## Make sure we use ts_css transformation
>> RTE.config.tt_content.bodytext.proc.overruleMode = ts_css
>> RTE.config.tt_content.bodytext.types.text.proc.overruleMode = ts_css
>> RTE.config.tt_content.bodytext.types.textpic.proc.overruleMode = ts_css
>>
>> Chiaramente poi è da personalizzare in base al foglio di stile che usi tu.
>>
>> Con queste due righe:
>> contentCSS = fileadmin/templates/media/css/rte.css
>> classesTable = borderBlue,borderBlack,transparent
>> Io abilito il foglio di stile e con la seconda riga definisco i nomi delle classi che possono essere date alle tabelle. Le vedi poi nella finestra delle proprietà della tabella.
>>
>> Spero di averti risposto.
>>
>> Ciao
>> Federico
>>
>>
>> Il giorno 30/dic/2011, alle ore 10:10, Elena Bartolotti ha scritto:
>>
>>> Ciao a tutti e buone feste (per chi se le può godere ^^)
>>> Sto litigando con l'RTE perchè non mi dà la possibilità di allineare le tabelle.
>>> Sul testo nessun problema, gli allineamenti vengono applicati tramite classe al paragrafo e va tutto bene, ma se inserisco una tabella, la stessa funzione mi è preclusa e quindi non riesco per esempio a mettere una tabella di 200px allineata al centro, se non intervenendo direttamente sul codice del record, cosa che non posso certo chiedere al mio cliente.
>>>
>>> Ho provato ad intervenire con vari codici nel Page TSConfig, ma senza risultato. Quel che è peggio è che poi mi sono resa conto che non mi prende nemmeno le classi incluse di default nell'rte (csc-frame...): se anche le attribuisco, al salvataggio le perdo.
>>>
>>> Qualcuno riesce a darmi una soluzione?
>>>
>>> Anticipo i miei ringraziamenti a chiunque mi voglia dare una mano e vi auguro nuovamente buone feste!
>>>
>>> --
>>> Elena Bartolotti
>>> _______________________________________________
>>> TYPO3-UG-Italy mailing list
>>> TYPO3-UG-Italy at lists.typo3.org
>>> http://lists.typo3.org/cgi-bin/mailman/listinfo/typo3-ug-italy
>>
>
>
> --
> <font color="#999999" face="Helvetica, Arial, sans-serif"><font
> size="-1"><b>Elena Bartolotti</b><br>
> _________________________________________<br>
> <br>
> </font><img alt="InteRa srl"
> src="file:///C:/Users/Elena Bartolotti/Desktop/Merc!/Merc!/logo-intera.gif"
> height="38" width="80"><br>
> <font size="-2"><b>InteRa s.r.l.</b><br>
> Via R. Murri, 27 - 48124 Ravenna<br>
> Tel. 0544 462628 Fax 0544 467457<br>
> E-mail elena at intera.it - www.intera.it<br>
> P.IVA, Cod. Fisc. e Iscr. Reg. Imprese di RA 02039980392<br>
> Cap. Sociale € 10.000,00<br>
> <br>
> Ai sensi del D. Lgs. n. 196/2003 si precisa che le informazioni
> contenute nella presente comunicazione sono strettamente riservate e ad
> uso esclusivo del destinatario. In caso di ricevimento, anche parziale,
> del presente documento da parte di soggetto diverso dal destinatario
> indicato, questi deve ritenersi diffidato dal farne uso a qualsiasi
> titolo e distruggere il file erroneamente ricevuto.</font></font><br>
> _______________________________________________
> TYPO3-UG-Italy mailing list
> TYPO3-UG-Italy at lists.typo3.org
> http://lists.typo3.org/cgi-bin/mailman/listinfo/typo3-ug-italy
More information about the TYPO3-UG-Italy
mailing list