[TYPO3] spacer pages have sub pages not appearing; SPC properties?

[Andrew Davis]

Well, the question remains, but moving the subpages onto the same level 
as the spacer functionally solved my dilemma...

PAGE1
   PAGE S (Spacer)
   PAGE N
   PAGE O
PAGE 2

Andrew


Andrew Davis wrote:
> Hi all,
> 
> I am trying to make a nice menu using spacer pages
> 
> I have found a tutorial here
> http://www.mcuniverse.com/Spacer-Page.75.0.html
> which was a good start (Thanks Marlie!)
> 
> I have enabled a spacer page on my subnav menu, but subpages of that 
> spacer page are not appearing in the menu.
> 
> 
> PAGE1
>   PAGE S (Spacer)
>     PAGE N
>     PAGE O
> PAGE 2
> 
> So here page "N" and "O" do not appear in the menu.
> 
> 
> I was thinking that perhaps I have to enable that specifically, using 
> properties of SPC, but I dont see much in the TSREF about SPC items 
> specifically, only to enable them.
> 
> 
> OR that submenus are not possible with spacers?
> 
> 
> 
> 
> there is mt relevant typoscript...
> 
> [START TS]
> 
> #Dropdown menu, level 1
> temp.menu_2.2 = GMENU
> temp.menu_2.2 {
> 
>   expAll=1
>   relativeToParentLayer = 1
> 
>   # Normal state properties
>   NO {
>     XY=234,25
> 
>     7 = BOX
>     7.dimensions = 0,0,234,25
>     7.color = #BEB9B9
> 
>     8 = BOX
>     8.dimensions = 1,1,232,23
>     8.color = #E1E3E5
> 
>     10 = TEXT
>     10.text.field = title
> 
>     10.fontSize = 13
>     10.fontColor = #20368E
>     10.offset = 12,16
>     10.align = left
>   }
>   RO < .NO
> 
>   #Rollover state properties
>   RO {
>     8 = BOX
>     8.dimensions = 1,1,233,23
>     8.color = #cccccc
>   }
>   #Enable active state; this must go AFTER the states config
>   RO = 10
> 
>   SPC = 1
>   SPC{
>     doNotShowLink = 0
>      doNotLinkIt = 1
> 
>     XY=234,25
> 
>     7 = BOX
>     7.dimensions = 0,0,234,25
>     7.color = #BEB9B9
> 
>     8 = BOX
>     8.dimensions = 1,1,232,23
>     8.color = #E1E3E5
> 
>     10 = TEXT
>     10.text.field = title
> 
>     10.fontSize = 13
>     10.fontColor = #20368E
>     10.offset = 12,16
>     10.align = left
>   }
> 
> 
> }
> 
> 
> [END TS]
> 
> 
> 
> Any help much appreciated,
> Thanks!
> Andrew Davis