[TYPO3-english] mh_omsqlio says "loading..." but gives no results

Fri Feb 20 14:12:00 CET 2015

Hi Nils, all,

*> Currently, jQuery seems to be included via "includeJSFooterlibs" [...]
or something *
*> similar. [...] You'll have to change that to "includeJSLibs" (or the
like), so that it gets *
*> included at the top.*
I went looking for the typoscript files in the bootstrap_package extension,
altered it there and this works fine. Thanks for the hint, was just what I
needed!

*> Or, the other way round, get mh_omsqlio to be included at the
bottom of the page.*
This will not be possible I guess, as it is the script in included inside
the <body> tag, on the place where the content is (results list) that
triggers the error, not the include of the generic library. But then again,
I'm not an expert in this field.

*> You don't have to touch either TS, you can alter the behavior using
your root page > Typoscript Setup.> 1. (negate/ empty the Footer
statement:>       includeJSFooterlibs.jquery >> 2. and include it at the
top:>       includeJSlibs.jquery = ...*
I didn't try this yet, but t
This actually makes 
even more sense, as the changes are in the site and not somewhere in a
file in the bootstrap_package extension.

Thank you for your valued input,

Nico

On Fri, Feb 20, 2015 at 9:33 AM, Nils Hodyas <post at dietantejensen.de> wrote:

> Hi Nico,
>
> actually, you'll have to inspect your typoscript code to find out where
> the inclusion is stated.
>
> 
> Currently, jQuery seems to be included via "includeJSFooterlibs" <
> http://docs.typo3.org/typo3cms/TyposcriptReference/Setup/Page/Index.html#
> includejsfooterlibs-array> or something similar. (see here:
> http://docs.typo3.org/typo3cms/TyposcriptReference/Setup/Page/Index.html)
>
> You'll have to change that to "includeJSLibs" (or the like), so that it
> gets included at the top.
>
> 
> Or, the other way round, get mh_omsqlio to be included at the bottom of
> the page.
>
> Inclusion of jQuery should be stated in the Introduction Package, the
> other one in the extension.
>
> 
> You don't have to touch either TS, you can alter the behavior using your
> root page Typoscript Setup.
>
> (negate/ empty the Footer statement:
>
> includeJSFooterlibs <http://docs.typo3.org/typo3cms/TyposcriptReference/
> Setup/Page/Index.html#includejsfooterlibs-array>.jquery >
>
> and include it at the top:
>
> includeJSlibs <http://docs.typo3.org/typo3cms/TyposcriptReference/
> Setup/Page/Index.html#includejsfooterlibs-array>
> 
> .jquery = ...
>
> )
>
> Hope this helps!
>
> Nils
>
>
>
>
>
> Am 19.02.2015 um 02:18 schrieb Nico Deblauwe:
>
>  Hi guys, girls,
>>
>> I've done some further research and think that I start to understand the
>> problem, but don't see a solution so far...
>>
>> In the console, I see 2 errors popping up:
>>
>>> Uncaught ReferenceError: jQuery is not defined
>>> index.php:121 Uncaught ReferenceError: $ is not defined
>>>
>> Apparently this happens typically [3] when the jquery loading happens
>> after
>> the function that calls for it. So I went looking in the source of the
>> page
>> (see [1]) and noticed that:
>>
>>     - the function call of mh_omsqlio happens at line 121 (in the body of
>>     the html)
>>     - the linking of the jquery only happens at line 166 (last line of the
>>     <body>)
>>
>> Could this be the the cause of the problem? And if so, how do I move the
>> linking to the header - is this in the bootstrap package or in mh_omsqlio?
>>
>> Thanks for your input in this!
>>
>> Regards,
>>
>> Nico
>>
>> For some strange reason, I don't manage to get the plugin working in even
>>
>>> it's most basic form - it continues to say "loading..." and no results
>>> appear [1].
>>>
>>> *What did I do?* 1/ I've initiated a "TYPO3 6.2 LTS Introduction
>>> Package" on launchr, 2/ did an update of the extension repository, 3/
>>> installed
>>> the "mh_omsqlio" extension, and 4/ created a new page [1] and added the
>>> extension to it as explained in the excellent manual (section 2.2 on p7
>>> of
>>> [2]).
>>>
>>> *Some extra info. Even stranger is that it actually seems to work in
>>> the
>>> back-end: I can select the table that I want, and set which fields I want
>>> to show. Currently it is configured to work with the TYPO3 "pages" table,
>>> but before I tried as well with an external table, and there the same
>>> story
>>> applies: it seems to work (and connect to the db) in the backend, but
>>> infinite "loading..." in the front-end.*
>>>
>>> Is there anyone who can point out (probably something obvious) what I
>>> forgot?
>>>
>>> Thanks for your input!
>>>
>>> Nico
>>>
>>> Ps:
>>> [1] See for yourself at
>>> http://vfc4e93d8.launchr.com/index.php?id=38&no_cache=1 *updated link*
>>> [2] Manual: http://transfer.marioonline.at/mh_omsqlio.pdf
>>>
>>>  [3] E.g. mentioned in
>> https://forum.jquery.com/topic/uncaught-referenceerror-
>> jquery-is-not-defined-21-6-2013
>> 
>>
>>
>>
> --
> Nils Hodyas - Webdesign von die Tante Jensen · Großherzog-Friedrich-Straße
> 117 · 66121 Saarbrücken · (0681) 925 63 43 · 0160 318 183 7 ·
> http://dietantejensen.de · DE 2757 96974 · Registergericht Saarbrücken
>
>
> _______________________________________________
> TYPO3-english mailing list
> TYPO3-english at lists.typo3.org
> http://lists.typo3.org/cgi-bin/mailman/listinfo/typo3-english
>

-- 
 *Nico Deblauwe*
 E-mail: nico at bluePundit.eu *|* Tel: +32 486 84 08 93

 *bluepundit *Comm. V.   webdesign & communicatie
 www.bluepundit.eu *|* Warmoesstraat 145 - 1210 Brussel