[TYPO3-english] Powermail 2.x and database insertion of form values does not work (TYPO3 6.1.x) Solved!

[Bert Hiddink [BENDOO e-work solutions]]

Solved! Oeps :)

Should be:
plugin.tx_powermail.settings.setup {
      dbEntry
..........

and not:

plugin.tx_powermail {
      dbEntry
..........

-brt

On 30-10-13 18:40, Bert Hiddink [BENDOO e-work solutions] wrote:
> Hello,
>
> I am using Powermail 2.x and want to insert some values of the submitted
> form into a table (tt_address). This was a working feature from 1.6.x
> but can't get it working with 2.x
>
> Acccording the manual, the snippet which should do this:
>
> plugin.tx_powermail {
>
> # Save values to any table (example for tt_adress)
> dbEntry {
>
> # enable or disable db entry for tt_address
> tt_address._enable = TEXT
> tt_address._enable.value = 1
>
> # write only if field email is not yet filled with current value
> # (update: update values of existing entry)
> # (none: no entry if field is filled)
> # (disable: always add values don't care about existing values)
> tt_address._ifUnique.email = disable
>
> # add mm relation to uid 2 of tt_address_group (via mm table)
> tt_address._mm = COA
> tt_address._mm.10 = COA
> # 1 is always the mm table
> tt_address._mm.10.1 = TEXT
> tt_address._mm.10.1.value = tt_address_group_mm
> # 2 is always the second table (e.g. categories table)
> tt_address._mm.10.2 = TEXT
> tt_address._mm.10.2.value = tt_address_group
> # 3 is always the uid of a data record of the second table to get a
> relation to this (in this case uid 1 of tt_address_group)
> tt_address._mm.10.3 = TEXT
> tt_address._mm.10.3.value = 1
>
>
> # fill table "tt_address" with field "pid" with the current pid (e.g. 12)
> tt_address.pid = TEXT
> tt_address.pid.value =120
>
> tt_address.addressgroup=TEXT
> tt_address.addressgroup.value=1
>
> # fill table "tt_address" with field "email" with a static value =>
> mail at mail.com
> tt_address.email = TEXT
> tt_address.email.value = mail at mail.com
>
> }
> }
>
> The above does not work (I test with only static values), nothing is
> inserted in tt_address while mails are send correctly.
>
> Any ideas/pointers?
>
> Thanks and regards,
> Bert