[Typo3] Direct Mail does not send Testmail or Mass-Send

Fabian Langheim fabian.langheim at ifact.de
Thu Feb 3 12:12:52 CET 2005


Ok, the -t param was the problem indeed. I removed it from the sendmail line
in the php.ini, now it works fine.


"Fabian Langheim" <fabian.langheim at ifact.de> schrieb im Newsbeitrag
news:mailman.1.1106913631.2902.typo3-english at lists.netfielders.de...
> Apache is listening on all IPs afaik.
>
> I took a look at the mail log and found the following:
> Jan 28 12:39:44 b12772-001 postfix/sendmail[11579]: fatal: cannot handle
> command-line recipients with -t
>
> Could this be the problem?
>
> Fabian
>
> "Ralf Schläfer" <schlr000 at gmx.de> schrieb im Newsbeitrag
> news:mailman.1.1106850536.14513.typo3-english at lists.netfielders.de...
> > Hi Fabian,
> >
> > I had a similar problem. As it turned out my httpd.config was the
reason.
> >
> > Typo3 told me that it fetched and compiled the newsletter which infact
was
> > not true (the size of the newsletter was only 147 (not kb)). Even if the
> > newsletter was not compiled I could send it, but all I received was the
> > apache message that x Mails were processed.
> >
> > Did you doubelcheck the sendmail log? If there is no entry for the Mails
> you
> > just sended, probably apache is the reason. Is apache listening on all
> > adresses or just on the internal IP?
> >
> > ciao
> >
> >
> >
> >
> >
> > "Fabian Langheim" <fabian.langheim at ifact.de> schrieb im Newsbeitrag
> > news:mailman.1.1106825835.12541.typo3-english at lists.netfielders.de...
> > >I tried 2 adresses, both on our server, both on different domains than
> the
> > > direct_mail installation
> > >
> > > sendmail should be configured correctly, as it works with 2 other
> > > installations of direct_mail (with typo3 3.6.0)
> > >
> > > "Brian Slezak" <Brian.Slezak at cor.org> schrieb im Newsbeitrag
> > > news:mailman.877.1106760964.2660.typo3-english at lists.netfielders.de...
> > > Are you sending to addresses other than your return path or 'from'
> > > address?
> > > There may be something stopping this internally.  Try sending to an
> > > address
> > > off-site.
> > >
> > > Also make sure you have sendmail configured correctly.
> > >
> > > Brian
> > >
> > >> -----Original Message-----
> > >> From: Fabian Langheim [mailto:fabian.langheim at ifact.de]
> > >> Sent: Wednesday, January 26, 2005 10:30 AM
> > >> To: typo3-english at lists.netfielders.de
> > >> Subject: Re: [Typo3] Direct Mail does not send Testmail or Mass-Send
> > >>
> > >>
> > >> I tried that now, disabled plaintext, send only to the two
html-users.
> > >> same thing. no newsletter, just job end and start :(
> > >>
> > >>
> > >> "media.res | alex widschwendter"
> > >> <a.widschwendter at mediares.at> schrieb im
> > >> Newsbeitrag
> > >> news:mailman.1.1106755357.21493.typo3-english at lists.netfielders.de...
> > >> > hi fabian,
> > >> >
> > >> > > I'm using Typo3.7.0 with direct_mail 1.0.8
> > >> > > I created the setup exactly according to the
> > >> documentation and even
> > >> > > doublechecked it with a working direct_mail (on T 3.6.1).
> > >> > > I also spend over an hour searching the archives, but the problem
> > >> remains.
> > >> > >
> > >> > > The new direct_mail installation won't send any test- or
> > >> massmail. The
> > >> > > mailerengine says "2 mails send", but I only get the
> > >> mails for "Job
> > >> start"
> > >> > > and "Job end".
> > >> >
> > >> > testmail users are marked for testmails?
> > >> > both versions (html & print) of the page are existing?
> > >> >
> > >> > mark user as html receiver and send just html mails. does this
work?
> > >> >
> > >> > hope you get an idea?
> > >> >
> > >> > alex
> > >>
> > >>
> > >> _______________________________________________
> > >> Typo3-english mailing list
> > >> Typo3-english at lists.netfielders.de
> > >> http://lists.netfielders.de/cgi-bin/mailman/listinfo/typo3-english
> > >>
> > >
> > >
> >
> >
>
>





More information about the TYPO3-english mailing list