[TYPO3-UG Oesterreich] install-tool findet imagemagick nicht
Büchler Roland
office at bupa.at
Tue May 8 20:57:58 CEST 2007
Hallo nochmals,
hab in der Zwischenzeit mit der php.ini folgendes getest:
1.) Safe_mode = Off --> ImageMagick wird gefunden
2.) safe_mode = On
safe_mode_exec_dir = /usr/bin/ --> ImageMagick wird gefunden
Image processing tests 1,2,3 und 5 funzen
aber test 4 mit combining images ergibt bei beiden Varianten:
"Combine using a GIF mask with only black and white
There was no result from the ImageMagick operation
Below there's a dump of the ImageMagick commands executed:
/usr/X11R6/bin/convert -colorspace GRAY +matte
/var/www/html/t3/typo3/sysext/install/imgs/blackwhite_mask.gif
/var/www/html/t3/typo3temp/temp/17beae3675ac2aaa4d0dfff7d9967e7c.gif
/usr/X11R6/bin/combine -compose over +matte
/var/www/html/t3/typo3/sysext/install/imgs/greenback.gif
/var/www/html/t3/typo3/sysext/install/imgs/jesus.jpg
/var/www/html/t3/typo3temp/temp/17beae3675ac2aaa4d0dfff7d9967e7c.gif
/var/www/html/t3/typo3temp/install_44f1273ab1.jpg"
3.) ... geh mal über "All Configuration" rein und such' nach [im_path] und
tipp dort "/usr/bin/" ein und lösch' den Wert im Zweifelsfall aus dem
[im_path_lzw] Feld --> "Write to localconf.php" ...
habe ich gemacht, jedoch imageMagick wird nicht gefunden
mit Safe_mode=off wie oben(1. und 2.), test 4 "combining images" geht nicht,
jedoch die anderen Tests (1,2,3,5) funktionieren:
combine using a GIF mask with only black and white
There was no result from the ImageMagick operation
Below there's a dump of the ImageMagick commands executed:
/usr/bin/convert -colorspace GRAY +matte
/var/www/html/t3/typo3/sysext/install/imgs/blackwhite_mask.gif
/var/www/html/t3/typo3temp/temp/2b32ca5b426723445f6073e8306a4048.gif
/usr/bin/combine -compose over +matte
/var/www/html/t3/typo3/sysext/install/imgs/greenback.gif
/var/www/html/t3/typo3/sysext/install/imgs/jesus.jpg
/var/www/html/t3/typo3temp/temp/2b32ca5b426723445f6073e8306a4048.gif
/var/www/html/t3/typo3temp/install_44f1273ab1.jpg
soll ich jetzt Variante 1., 2. od. 3. machen und welche Auswirkung hat ein
Safe_mode = Off bzw. ein safe_mode_exec_dir = /usr/bin/
lg roland
-----Ursprüngliche Nachricht-----
Von: typo3-at-bounces at lists.netfielders.de
[mailto:typo3-at-bounces at lists.netfielders.de] Im Auftrag von Wolfgang
Klinger
Gesendet: Dienstag, 08. Mai 2007 20:30
An: TYPO3 Usergroup Oesterreich
Betreff: Re: [TYPO3-UG Oesterreich] install-tool findet imagemagick nicht
Hallo,
Büchler Roland wrote:
> ImageMagick enabled: 1
> ImageMagick path: /usr/X11R6/bin/ ()
> ImageMagick path/LZW: /usr/bin/ ()
...und der Pfad ist ja falsch ;-)
geh mal über "All Configuration" rein und such' nach [im_path] und tipp dort
"/usr/bin/" ein und lösch' den Wert im Zweifelsfall aus dem [im_path_lzw]
Feld
--> "Write to localconf.php"
hth, lg
Wolfgang
_______________________________________________
TYPO3-at mailing list
TYPO3-at at lists.netfielders.de
http://lists.netfielders.de/cgi-bin/mailman/listinfo/typo3-at
More information about the TYPO3-at
mailing list